LixelStudio
Point Cloud Processing Workstation
Raw capture to finished point cloud in one click, for the Lixel L3, K2, L2 Pro and K1. SLAM mapping, map fusion, quality control, measurement and export in one desktop application.
From Raw Scan to Production-Ready
Point Cloud
LixelStudio handles the full point cloud pipeline: SLAM processing, map fusion, quality control, measurement, 2D drawing and export to the formats CAD, BIM and GIS teams use.
Colour you can read
Consistent, sharp point cloud colour, including captures made in low light.
Level, true surfaces
Floors and walls come out flat, so drafters spend less time correcting them.
Clean without losing detail
Filtering clears the noise and leaves the structure behind it.
A complete mesh
A stable, closed mesh with accurate colour, ready to hand over.
From raw capture to a checked point cloud

SLAM mapping
Run a raw capture through in one click. Loop closure, removal of moving objects and the coordinate transformation are handled in the same job.

Map fusion
Bring separate capture sessions together into one dataset, tied by RTK, ground control points or connection points. This is how large sites get covered.

PPK support
Post-process against base-station data for tighter global alignment and a more accurate point cloud.

Quality control
Compare the result with your check points automatically and get a statistical report for the job file.
Measure and draw from the point cloud

Point cloud slicing
Cut horizontal and vertical sections for floor plans and cross-sections.

Alignment tool
Orient a dataset to its coordinates, then fine-tune it by hand.

Measurement suite
Point, distance, area and angle, in metric or imperial.

Panorama overlay
View the point cloud and panoramas in sync, and step through a building floor by floor.

2D drawing
Generate floor plans from the point cloud, with 2D contours extracted for you.

Volume calculation
Single and comparison volumes for stockpiles, with the report produced automatically.
Into the systems your team already runs

Remote transmission
Stream the point cloud live and start or stop a K1 or L2 Pro remotely, through the cloud service or a direct USB or Wi-Fi link.

Coordinate systems
More than eight systems built in, plus custom 7-parameter transformations and geoid models.

Export
LAS, E57 and RCP for CAD and BIM, structured E57 with panoramas, and mesh as .obj or .osgb.
Images and footage: XGRIDS
Industry-Standard Outputs
Point clouds for Autodesk ReCap, CAD and GIS tools, and meshes for visualisation and handover. Structured E57 carries the panoramas with it.
Global Standards Built-In
International coordinate systems built in, plus custom 7-parameter datum transformations and geoid models, so data lands in the system the job uses.
From Point Cloud to BIM Deliverable
Real project footage — scan data processed in LixelStudio, overlaid against the design model for verification, clash detection, and as-built documentation.
Built for the XGRIDS Ecosystem
LixelStudio is the native processing workstation for Lixel scanners, with no third-party software required. PortalCam captures go through LCC Studio instead.
Pair with Lixel CyberColor
for 3DGS Reconstruction
LixelStudio handles your point cloud pipeline. Lixel CyberColor (LCC) is the companion platform for 3D Gaussian Splatting reconstruction, turning Lixel captures into photorealistic, interactive 3D environments deployable across Unity, Unreal, WebGL, Apple Vision Pro, and more.
Common Questions, Answered
What is LixelStudio?
LixelStudio is the XGRIDS point cloud processing workstation for Lixel scanners: one-click SLAM processing, map fusion, PPK, quality control, measurement, 2D drawing and volume calculation, with output to LAS, E57, RCP and mesh for CAD, BIM and GIS work.
Is LixelStudio included with XGRIDS scanners?
Yes — every Lixel K1, K2, L2 Pro and L3 purchased through AECT includes 3× permanent LixelStudio licences, plus an LCC Basic licence for 3DGS.
Does LixelStudio process PortalCam data?
No. PortalCam captures go through LCC Studio, which builds the 3DGS scene. LixelStudio is for the Lixel scanners: L3, K2, L2 Pro and K1.
Does LixelStudio support PPK?
Yes — PPK support delivers enhanced absolute accuracy on top of the SLAM solution when you post-process against base-station data.
How do I get LixelStudio data into Revit?
Export RCP directly into Revit for manual modelling, or use the LCC for Revit plugin, which brings the LCC model in alongside your BIM with live sync and generates levels, walls, doors and windows.
Is there LixelStudio training in Australia?
Yes — AECT provides onboarding with every scanner and runs hands-on training up to the multi-day 3DGS Masterclass, covering capture through processing to delivery.
Ready to Process Smarter?
Talk to our team about LixelStudio and the full XGRIDS processing pipeline for your project.






