LIXEL L3 ROADSHOWAdelaide 19–20 Nov · Brisbane 20–21 Nov · Melbourne 23–27 Nov · Sydney 29 Nov – 4 DecBook a time in your city
XGRIDS FLAGSHIP — ENTERPRISE SLAM LiDAR

Lixel L2 Pro

16- or 32-line SLAM LiDAR with 360° panoramic colour. Handheld, drone-mountable, vehicle-mountable. 320K / 640K pts/s, up to 300 m range, 1 cm relative accuracy.

Request L2 Pro QuoteBook a Demo
XGRIDS Lixel L3 handheld SLAM scanner
NEW IN THE XGRIDS RANGE · LAUNCHED 15 SEPTEMBER 2026

Meet the Lixel L3 — 5 mm relative accuracy, built-in survey-grade RTK, 4K HDR true colour.

The L3 is in stock in Brisbane and ready for immediate delivery through AECT, and founder Jacob Lee has the first Australian unit on the road in Adelaide, Brisbane, Melbourne and Sydney from 19 November to 4 December. Not sure whether the L3, the L2 Pro or the K2 fits your work? The side-by-side comparison is on the L3 page.

XGRIDS Lixel L2 Pro — enterprise SLAM LiDAR scanner
320K / 640K pts/s
Scan Rate
0.5–300m
Range
1 cm
Relative Accuracy
1.7kg
Weight
16 / 32-line ToF
Channels
1TB SSD
Storage
From AUD $42,199 inc GST — AECT is Australia's Official National Distributor for XGRIDS
RTK OPTIONS

Survey-Grade Positioning

Add RTK for cm-level absolute accuracy. Choose Standard or Survey Grade depending on your project requirements.

Lixel L2 Pro with the Standard RTK module

L2 Pro + Standard RTK

Compact module for cm-level absolute positioning. GPS L1/L2/L5, GLONASS L1/L2, BDS B1/B2/B3 and Galileo E1/E5a/E5b/E6b; 0.8 cm + 1 ppm horizontal, 1.5 cm + 1 ppm vertical; 2.8 dBi antenna.

Lixel L2 Pro with the Survey RTK module and its disc antenna

L2 Pro + Survey Grade RTK

Same bands and rated accuracy, with a higher-gain disc antenna (5.5 dBi, axial ratio 3 dB or less) for weaker sky views. Both modules work handheld and vehicle-mounted.

VERSATILE MOUNTING OPTIONS

One Scanner. Every Platform.

The L2 Pro adapts to any capture scenario — handheld, airborne, vehicle-mounted, or hands-free.

Extension Pole

Extension Pole

Scan ceilings, facades, and hard-to-reach areas up to 2m above.

Drone Mount

Drone Mount

Mount on DJI Matrice 300 RTK or M350 RTK for aerial SLAM scanning at scale — recommended 3 m/s at 30 m (5 m/s maximum at 30 m). (L2 Pro is not compatible with the Matrice 400 series.) See the full drone-mode breakdown below.

Vehicle Mount

Vehicle Mount

Road corridors and large-area mobile scanning from a vehicle: 20–30 km/h recommended, 40 km/h maximum. See vehicle mode below.

Body Harness

Body Harness

Hands-free scanning for extended sessions and confined spaces.

RTK Module

RTK Module

Survey-grade cm-level absolute accuracy via GNSS correction.

LixelGO App

LixelGO App

Real-time point cloud monitoring and scan control from your phone.

DRONE MODE · DJI M300 / M350 RTK

Flying the L2 Pro

The Lixel L2 Pro mounts to the DJI Matrice 300 RTK and Matrice 350 RTK with the optional XGRIDS drone mounting kit. It is not compatible with the Matrice 400 series; for the M400, the XGRIDS mount for the Lixel L3 is expected late November to early December 2026. Here is what the aerial configuration actually involves — the kit, the flight envelope, and the processing path.

AECT’s L2 Pro in flight, Queensland (4 s).
The drone kit on site.
L2 Pro on a DJI Matrice.
Bracket on the gimbal mounting holes.
Scanner on the bracket.
Start every flight from LixelGO with mount type Drone.

Media: AECT · XGRIDS

What the kit is

The drone mounting kit is a bracket, the XGRIDS gimbal adapter ring, a custom Type-C cable and an installation toolkit; it seats the L2 Pro under a DJI Matrice 300 RTK or Matrice 350 RTK. The scanner itself is unchanged — 1.7 kg without battery, industrial aluminium casing, IP54, Class 1 905 nm eye-safe laser. The same unit comes off the aircraft and goes straight onto the 2 m pole or the vehicle mount for the ground pass.

Fitting it

Screw the bracket back plate to the scanner, fix the bracket to the aircraft's gimbal holes with its arrow towards the adapter ring, fit the ring, then mount the L2 Pro and toggle the safety button so the tightening button locks. Screw the Type-C cable down: a loose cable can drop RTK in flight. The scanner runs on aircraft power through the DJI SkyPort, which also passes it the aircraft's RTK.

Flight envelope

XGRIDS recommends 3 m/s at 30 m AGL. Treat 50 m and 5 m/s as the limit, where accuracy drops to about 5–10 cm, limited by the DJI RTK. For an accurate point cloud or 3DGS scene, slower is better: fly as close to a slow walking pace as the mission allows, and set the speed by what the client needs from the data. As a guide, 20 minutes at 3 m/s with 60 m line spacing covers about 21.6 ha.

GNSS in the air

Three GNSS modes: RTK for real-time correction, PPK for post-processed work with no live link, and DJI mode, which takes the correction from the aircraft's own RTK. Accuracy is 3 cm absolute H/V RMSE with RTK and 1 cm relative RMSE once post-processed. Output georeferences to WGS84, CGCS2000 or ITRF2008.

Processing path

Drone data needs LixelStudio v3.3 or later, with LixelGO v1.2.0 or later on the phone. The .las written in flight is downsampled — full resolution comes only from LixelStudio post-processing, and so does the 1 cm relative figure. Every L2 Pro includes three permanent LixelStudio licences, with no subscription, and the data is 100% yours.

What you get back

Up to 1 million points per square metre, with cloud thickness of 0.5 cm within 10 m of the trajectory. The 360° × 270° field of view and dual 48 MP cameras mean the aerial pass returns coloured point cloud, not bare geometry — which is what makes the aerial and ground datasets merge cleanly instead of sitting in two different colour spaces.

Limits worth knowing first

There is no live view in drone mode (no 4G module), so drift only shows after processing. Aerial and ground scans do not map-fuse: join them with manual and ICP registration, which needs about 50% feature-rich overlap. The 300 m variant's distant points are too sparse to keep from the air. RTK works outdoors only, and IP54 means dust and splash, not rain — this is not a wet-weather payload.

One sensor, three mounts — why that matters on a corridor job

The usual way to cover a corridor is a dedicated aerial LiDAR payload for the flight and a separate handheld for everything under canopy, at the abutments and inside structures — two sensors, two calibrations, two point clouds to reconcile. The L2 Pro flies the corridor, then comes off the aircraft and walks the parts the aircraft cannot see, producing one dataset from one sensor in one coordinate frame. AECT Solutions supplies, supports and trains on the L2 Pro in Australia as XGRIDS' national distributor, and the drone mounting kit is available with every configuration — talk to us about which one fits the job before you buy the airframe.

Video: XGRIDS — the L2 Pro drone mounting bracket.

VEHICLE MODE · XGRIDS VEHICLE-MOUNT KIT

Driving the L2 Pro

The XGRIDS vehicle-mount kit holds the L2 Pro on electric suction cups at the rear of a car or ute, for roads, corridors and large sites. Standard and Survey RTK both work, and the same scanner comes off the roof for the handheld pass.

AECT’s L2 Pro on the vehicle mount (4 s).
L2 Pro on the vehicle mount.
Main bracket on electric suction cups.
Quick-release bracket.
V-mount vehicle battery, about 3 hours.
Mount it centred at the rear so the body does not block the scan.

Media: AECT · XGRIDS

What the kit is

Main bracket with a battery plate, quick-release bracket, electric suction cups with a wireless monitoring module, a V-mount vehicle battery, power and charging cables and a toolkit.

Mounting it

Centre the mount at the rear of the vehicle on a flat, clean, oil-free surface, so the body does not block the scan, and add a safety strap. Each suction cup's display shows its battery, wireless signal, air pressure and motor status. In LixelGO, choose mount type Vehicle-Mounted and the RTK type fitted.

Driving speed

XGRIDS recommends 20–30 km/h, with a maximum of 40 km/h. In AECT's Australian field tests, the 300 m L2 Pro in Triple Return mode gave its best results at 15–20 km/h. The slower you drive, the closer the result is to handheld.

Power

The V-mount vehicle battery runs the L2 Pro for about 3 hours, against about 1.5 hours on the handle battery. Each suction cup's own battery lasts 8–12 hours of normal use and can charge from USB-C while it runs.

Accuracy and limits

Within the recommended speed and with RTK gaps under 100 m: 3 cm horizontal and 5 cm vertical absolute RMSE, 2 cm relative and 3 cm repeatability, with colour. Not supported in vehicle mode: 3DGS, point-cloud enhancement and map fusion.

Safety first

A mount that works loose at speed is a road-safety risk. Check the suction before every run and again during long or hot sessions, and have a passenger, not the driver, run LixelGO.

Video: XGRIDS — the L2 Pro vehicle mount.

IN THE FIELD

See It in Action

L2 Pro with RTK scanning outdoors on construction site
L2 Pro handheld scanning demonstration
LixelGO app showing real-time point cloud from L2 Pro
L2 PRO IN MOTION

Large areas on foot, in full colour

Built spaces, tree cover and long, tunnel-like runs.

The L2 Pro carried on foot, in built spaces and under trees.
From a walk on site to a point cloud, monitored live on a phone.
Point cloud colour that reads like the real street.
Multi-SLAM holding together in a tight, tunnel-like space.

Footage: XGRIDS

VIDEO DEMO

3DGS for Construction QA/QC

See how AECT uses the L2 Pro for digital pre-pour inspections and construction verification.

SPECIFICATIONS

Full Specifications

Scan Rate320,000 / 640,000 points per second
Range0.5–120 m (16- and 32-channel 120 m) / 0.5–300 m (32-channel 300 m)
Accuracy (Relative)1 cm post-processed · 2 cm real time
Accuracy (Absolute)3 cm RMSE, real time and post-processed (RTK or control-point gaps under 100 m)
Repeatability2 cm (RMSE)
Point-cloud Thickness0.5 cm within 10 m of the walking path
Channels16 or 32-line Time-of-Flight
Weight1.7 kg (about 2.5 kg with battery)
Dimensions180 × 130 × 400 mm
Field of ViewLiDAR 360° × 270° · panoramic cameras 190° × 190°
Power / Interface< 30 W · USB 3.1 Gen 2
Operating Temperature−20 °C to 50 °C
Point DensityUp to 1,000,000 pts/m²
Camera Resolution2 × 48 MP
Levelling Accuracy0.015° horizontal (RTK or control-point fusion) · 0.03° vertical
IP RatingIP54
Battery LifeAbout 1.5 hours of scanning per battery · about 2 h to charge
Storage1 TB internal SSD
RTK ModuleSupported (Standard & Survey Grade)
Extension PoleSupported (2m)
Drone MountDJI M300 / M350 RTK bracket (SkyPort power + RTK pass-through)
Output Formats.las + .jpg native · .las / .laz / .ply / .e57 / .rcp / .ilas point clouds, .obj / .osgb meshes and .dxf drawings via LixelStudio
Reconstruction3DGS via LCC Studio: .lcc / .lcc2 with LCC Basic · .ply / USD / 3D Tiles with LCC Premium
USE CASES

What You Can Do

The L2 Pro is built for large-scale, high-accuracy capture across the toughest environments.

Topographic and mine surveying

Drone and handheld capture over open-cut pits, stockpiles and terrain for volumes, DSM/DEM and change detection, georeferenced with RTK or PPK.

Images: XGRIDS

Infrastructure inspection and monitoring

Repeat capture of bridges, retaining walls, tunnels and rail corridors, from the air and from the ground, to compare condition between visits.

Images: AECT

Corridor mapping

Roads, rail and utility corridors from a vehicle or from the air on a DJI M300/M350, with RTK keeping the whole corridor in one coordinate frame.

Images: AECT · XGRIDS

Construction verification

Pre-pour inspections, as-built checks and progress capture across active sites: a point cloud to measure and, through LCC, a 3DGS scene for the wider team.

Images: XGRIDS

Heritage and façades

Non-contact capture of heritage buildings, façades and interiors, with point-cloud enhancement down to 1 mm spacing where the detail matters.

Images: XGRIDS

Forestry and agriculture

Walk under canopy, where aerial LiDAR cannot see the ground and GNSS is weak, for stem maps, canopy structure and plot inventories.

Images: XGRIDS

Film and virtual production

Capture sets and locations as a measured point cloud and, through LCC, a photoreal 3DGS scene for previs, virtual production and VFX.

Image: XGRIDS

SOFTWARE ECOSYSTEM

Works With Your Existing Stack

LCC Studio
LixelStudio
LixelGO App
Esri ArcGIS Pro
CloudCompare
Global Mapper
Autodesk Revit (via LCC)
FAQ

Common Questions, Answered

What is the XGRIDS Lixel L2 Pro?

The Lixel L2 Pro is XGRIDS' enterprise 16- or 32-line SLAM LiDAR scanner: 320K or 640K points/sec, 0.5–120 m or 0.5–300 m range, 1 cm relative accuracy post-processed (3 cm absolute with RTK), 360° panoramic FOV, dual 48 MP cameras, IP54 rating and a 1 TB internal SSD, at 1.7 kg. In Australia it is sold and supported by AECT Solutions, the official XGRIDS national distributor.

Can the Lixel L2 Pro be mounted on a drone?

Yes — the L2 Pro is drone-mountable on DJI Matrice series aircraft (M300/M350 RTK), and also operates handheld, on a 2 m extension pole, or vehicle-mounted. One sensor covers aerial and ground capture on the same project.

Which drones is the Lixel L2 Pro compatible with?

The Lixel L2 Pro mounts to the DJI Matrice 300 RTK and the DJI Matrice 350 RTK using the optional XGRIDS drone mounting kit (bracket plus gimbal adapter). It is not compatible with the Matrice 400 series; for the M400, XGRIDS' L3 mount is expected late November to early December 2026. The same 1.7 kg sensor also runs handheld, on a 2 m extension pole, and vehicle-mounted, so one scanner covers the aerial and the ground pass on the same project.

What flight speed and altitude should the Lixel L2 Pro be flown at?

XGRIDS recommends 3 m/s at 30 m above ground level. Treat 50 m and 5 m/s as the limit, where accuracy drops to about 5–10 cm, limited by the DJI RTK. For an accurate point cloud or 3DGS scene, slower is better: fly as close to a slow walking pace as the mission allows, and set the speed by what the client needs from the data.

How is Lixel L2 Pro drone data processed?

Drone-mode data requires LixelStudio v3.3 or later on the desktop, with LixelGO v1.2.0 or later on the mobile side. The real-time .las the scanner writes in flight is downsampled — full-resolution point clouds come only from LixelStudio post-processing, which is also where the 1 cm relative accuracy figure is achieved. Every L2 Pro includes three permanent LixelStudio licences with no subscription, and the client owns 100% of the data.

How accurate is the Lixel L2 Pro?

1 cm relative accuracy post-processed (2 cm in real time) and 3 cm absolute RMSE with RTK or control-point gaps under 100 m, with 2 cm repeatability. In vehicle mode, within the recommended speed: 3 cm horizontal and 5 cm vertical absolute RMSE. That is engineering-grade output suitable for volumes, corridors and construction verification.

What file formats does the L2 Pro output?

The scanner records .las point clouds and .jpg panoramas natively; LixelStudio exports .las, .laz, .ply, .e57 and .rcp point clouds, .obj and .osgb meshes and .dxf drawings, and LCC produces photorealistic 3D Gaussian Splatting scenes as .lcc and .lcc2 (LCC Basic) or .ply, USD/USDZ and 3D Tiles (LCC Premium) — feeding standard pipelines into Revit, Civil 3D, ArcGIS, Unreal and Omniverse.

How fast can the Lixel L2 Pro be driven in vehicle mode?

XGRIDS recommends 20–30 km/h, with a maximum of 40 km/h. In AECT's Australian field tests, the 300 m L2 Pro in Triple Return mode gave its best results at 15–20 km/h. The slower you drive, the closer the result is to handheld. Vehicle mode does not support 3DGS, point-cloud enhancement or map fusion.

What is the Lixel L2 Pro best used for?

Mine-site surveying and stockpile volumes, corridor and large-area topographic mapping, infrastructure monitoring, heritage preservation and construction verification — anywhere you need long range and survey-grade accuracy from a mobile scanner.

How do I buy or rent the L2 Pro in Australia?

Through AECT Solutions — the official XGRIDS national distributor. Three configurations (inc GST): 16-channel / 120 m at AUD $42,199 · 32-channel / 120 m at $61,099 · 32-channel / 300 m at $85,499 — all with onshore support, warranty, operator training and rental options. Contact AECT to match the right configuration and book a demonstration.

Need Enterprise LiDAR?

Talk to our team about the L2 Pro for your next project. Demo units available.

Request L2 Pro QuoteGet a Quote