LIXEL L3 ROADSHOWAdelaide 19–20 Nov · Brisbane 20–21 Nov · Melbourne 23–27 Nov · Sydney 29 Nov – 4 DecBook a time in your city
NEW · ENGINEERING-GRADE POINT CLOUD

XGRIDS Lixel K2
Built-in RTK. Engineering-grade data.

Capture → Process → Use, with minimal rework. Lightweight handheld LiDAR with built-in RTK and real-time colourised point cloud. Scan in the morning. Deliver before lunch.

Order Your K2 →Book a Demo
Not sure which model?

K1 vs K2 vs L2 Pro — we match the unit to your workflow in 30 minutes.

Try before you buy

Daily / weekly / monthly rental with training — monthly plans earn rent-to-buy credit.

Don't want to own gear?

We capture your site and deliver the browser-shareable 3D — no hardware needed.

XGRIDS Lixel L3 handheld SLAM scanner
NEW IN THE XGRIDS RANGE · LAUNCHED 15 SEPTEMBER 2026

Meet the Lixel L3 — 5 mm relative accuracy, built-in survey-grade RTK, 4K HDR true colour.

The L3 is in stock in Brisbane and ready for immediate delivery through AECT, and founder Jacob Lee has the first Australian unit on the road in Adelaide, Brisbane, Melbourne and Sydney from 19 November to 4 December. Not sure whether the L3, the L2 Pro or the K2 fits your work? The side-by-side comparison is on the L3 page.

AUSTRALIA · PRE-ORDERS OPENOrder your K2 through AECT — Australia's Official National Distributor for XGRIDS. In stock now, shipped Australia-wide from Queensland.
XGRIDS Lixel K2 — lightweight handheld LiDAR scanner with built-in RTK and real-time colourised point cloud
About 1.2 kg
Weight
Built in
RTK
40 m @ 10% · 100 m max
Range
1 cm (RMSE)
Relative Accuracy
Yes (3 cams)
Real-time Colour
LAS / 3DGS / Mesh
Outputs
K2 STANDARD
AUD $15,999inc GST · Battery × 1 · LixelStudio + LCC included
K2 SCAN MORERecommended
AUD $16,999inc GST · Battery × 2 — full-day capture

In stock. Ships Australia-wide from Queensland.

XGRIDS Pillars

The K2 — Three Pillars

Verbatim from XGRIDS' official launch positioning.

01 · DATA FIDELITY

Data Fidelity

Engineering-grade output. 1 cm relative accuracy, 3 cm absolute with built-in RTK, point-cloud thickness within 1 cm. Vertical stays vertical. Contours stay sharp. Measurement-ready data, not best-effort point clouds.

02 · SCENE VERSATILITY

Scene Versatility

Built for multi-scenario projects — outdoor corridors, indoor facilities, mixed environments, low-feature scenes. Dynamic object removal cleans out passing people and vehicles automatically. One device, every site.

03 · ECOSYSTEM REACH

Ecosystem Reach

End-to-end workflow integration. Real-time point cloud, LCC2 photoreal model (8–10% of the data size of standard open-source 3DGS), structured mesh for BIM. Flows into Revit, Unity, Unreal, ArcGIS, NVIDIA Omniverse via LCC.

WHAT MAKES THE K2 DIFFERENT

Three Breakthroughs in One Walk

Built-in RTK — no external module

Built-in RTK — no external module

Full RTK and PPK capability inside the scanner body. Connect to a CORS network, hold a fixed solution, and your point cloud lands georeferenced to ~3 cm absolute. For Australian surveyors and asset owners, that's the difference between "scan data" and "survey-grade evidence".

Real-time colourised point cloud

Real-time colourised point cloud

Three onboard cameras (one front-facing + two fisheye, each 4000 × 3000 px) fuse RGB onto the point cloud as it captures. You see colour in the field, on the device, in the moment — not three hours later in the office. For BIM verification, real estate, and heritage work, real-time colour fundamentally changes what you can promise a client at the end of the walk.

One scan, multiple outputs — point cloud, mesh and 3DGS

One scan, multiple outputs — point cloud, mesh and 3DGS

One walk gives you a real-time point cloud, a post-processed engineering point cloud, a mesh and a photoreal 3D Gaussian Splatting model, all from the same dataset. Pair it with LixelStudio and LCC and the workflow is real: Capture → Process → Deliver, same day.

FROM CAPTURE TO OUTPUT

One Scan. Every Format You Need.

A single K2 walk-through produces a photorealistic 3DGS model, a clean mesh, and a survey-grade point cloud — ready for measurement, BIM, or browser delivery.

One K2 capture rendered four ways — 3D Gaussian Splatting, Mesh, real-time Point Cloud, and Point Cloud
Photorealistic 3DGS reconstruction — browser-viewable
Survey-grade measurement in LixelStudio

Capture & reconstruction examples — XGRIDS Lixel K2.

DAY-0 AUSTRALIAN SCAN

We Scanned a Real Queensland Job Site With the K2

Captured 5 May 2026 — twenty-four hours before the global launch. Concrete slab, vertical reinforcement, scaffolding, open earthworks. Five hours of real conditions, one Australian operator. The world's first published K2 use-case from a real Australian job site.

K2 QLD job site scan — site overview, real-time colourised point cloud
K2 QLD scan — vertical reinforcement and formwork detail
K2 QLD scan — scaffolding and slab edge with built-in RTK georeferencing
K2 IN MOTION

From a live check on site to robot simulation

Low light, live quality checks and the outputs a K2 capture feeds.

Check data quality on your phone while you scan.
The post-processed point cloud, the base for engineering deliverables.
Photoreal 3DGS that holds the fine detail of a dense flower wall.
A dim underground car park, still crisp in low light.
A digital twin of plant and equipment for day-to-day operations.
Real-world data fed into NVIDIA Isaac Sim for robot training.

Footage: XGRIDS

SEE IT LIVE

Explore a Real K2 Capture

Sydney's Federation Pavilion, captured with a K2 and streamed from AECT's own Australian infrastructure. We scanned the same site with a PortalCam too — open both and compare tiers.

Full screen
Federation Pavilion — Lixel K2 (engineering SLAM LiDAR).
Full screen
Same pavilion — PortalCam (3DGS camera). Compare the tiers yourself.

Browse the full live 3DGS Gallery →

RESERVE YOUR SERIAL NUMBER

Order the Lixel K2 Through AECT

Australia’s Official National Distributor for XGRIDS. In stock now. Place your order and we’ll come back within one business day with your GST tax invoice and delivery confirmation. Prefer to buy through a local authorised dealer? Find one here — same advertised price, MAP-protected channel.

BOOK A LIVE DEMO
On your project, on your site. We come to you.
GET A DATA ASSESSMENT
Real Aussie scan data benchmarked against your current workflow.
PARTNER WITH US
Referral or channel partnership — let’s build the AU network together.
K2 ORDER DETAILS

We’ll get back to you within one business day. By submitting you agree to our Privacy Policy.

CHOOSE THE RIGHT XGRIDS

K2 vs K1 vs L2 Pro

Lixel K2 (Recommended)Lixel K1 (Entry)Lixel L2 Pro (Enterprise)
WeightAbout 1.2 kg with battery and base1 kg1.7 kg (about 2.5 kg with battery)
Built-in RTKYesNo (external module)No (external module)
Real-time colourYesYesYes
Point rate200K pts/s200K pts/s320K / 640K pts/s
Range≥ 40 m @ 10% · 100 m max0.1–40 m @ 10% · 70 m @ 80%0.5–120 m or 0.5–300 m
Best environmentOutdoor & mixedGPS-denied indoor / undergroundLong-range corridors / drone
3DGS via LCCYesYesYes
DJI Matrice mountNoNoYes (M300 / M350)
Price (AUD inc GST)From $15,999$14,999Contact AECT

Choose the K2 if you work outdoors or in mixed environments and need RTK absolute positioning out of the box. The K2 is the right starting point for most Australian civil, construction, real estate, and heritage projects — survey-grade georeferencing, real-time colour, and 3DGS output in one lightweight device. Choose the K1 ($14,999) for GPS-denied environments, training, or budget-conscious teams. Choose the L2 Pro for long corridors, mining, or DJI Matrice drone-mount aerial LiDAR.

THE INDOOR-SCANNER QUESTION

K2 vs Leica BLK2GO

The BLK2GO has been the default lightweight reality-capture scanner for indoor work in Australia since 2020. It is genuinely good — and there is no published Australian price; C.R. Kennedy, the local Leica dealer, quotes on request. Here's how it lines up.

XGRIDS Lixel K2Leica BLK2GO
WeightAbout 1.2 kg with battery and base~1 kg
Built-in RTKYesNo
Real-time colourised point cloudYesNo
Range≥ 40 m @ 10% · 100 m max~25 m practical indoor
Point measurement rate200,000 pts/sec420,000 pts/sec
Price (AUD)$15,999 inc GSTNo published AU price — quote-on-request via C.R. Kennedy
Best forOutdoor / mixed / BIM / heritage / 3DGSIndoor precision capture

For most Australian civil, construction, infrastructure, real estate, and heritage professionals — those who need a scanner that works outdoors as well as indoors, with absolute georeferencing and no separate base station — the K2 is the better starting point at a fraction of international BLK2GO pricing (published authorised-dealer pricing overseas runs USD $37,500–$58,740; no AUD price is published locally).

THE BUYER'S MATH

Every Australian practice still paying $30K+ a year for a handheld they have to send away for processing before they can show anyone — that's the practice the K2 is built for.

With the K2 you process locally in LixelStudio (free, lifetime, unlimited). You 100% own your data. No mandatory cloud. No subscription. No round-trip to a vendor lab. Scan in the morning. Deliver before lunch.

TIER-1 SURVEYING VALIDATION · BENCHMARKED AGAINST LEICA RTC360

“Tier-1 surveying firms validating it against their Leica RTC360 datasets are seeing the same thing: gold-standard accuracy in a tool under 1 kilogram, at less than a quarter of the price, from just minutes of scanning.”

JL
Jacob Lee
Founder & Director, AECT Solutions · 12-month K2 field testing programme
USE CASES

Six Workflows the K2 Was Built For

C

Construction Progress Monitoring

Walk a site weekly, scan in the morning, deliver an as-built point cloud and 3DGS model before lunch. Compare against design intent in LixelStudio or push to Revit via LCC. Defects caught at the cost of a site visit, not a $300k rework claim.

I

Infrastructure Corridor Scan

Road, rail, and utility corridors at walking pace with full RTK georeferencing — no surveyor required for milestone capture. Repeatable verification loop, every scan in the same coordinate system as the last.

H

Heritage Building Capture

Document facades, churches, and listed buildings in a single walk — point cloud for the conservation engineer, 3DGS for the public-facing virtual tour. One capture, two deliverables, archive-ready.

F

Indoor Facility Mapping

BIM-verify hospitals, factories, warehouses, and data centres with 1 cm relative accuracy. Dynamic object removal cleans out staff and forklifts automatically — production-ready point clouds without manual editing.

M

Mining Stockpile & Volumetrics

Scan stockpiles, pit walls, and ROM pads with built-in RTK — volumetric calculation in LixelStudio, results within the same shift. Weekly volumes without flying a drone or booking a surveyor.

R

Real Estate & Property

Capture premium listings as both a measurement-grade point cloud and a 3DGS virtual walkthrough, viewable in any browser. A listing experience the photo-only competition cannot replicate.

SPECIFICATIONS

Full Specifications

TypeLightweight SLAM LiDAR with built-in RTK
LiDARClass 1 / 905 nm · 360° × −7° to +52° field of view
Point Rate200,000 pts/s
Range≥ 40 m @ 10% reflectivity · 100 m maximum
Accuracy (Relative)1 cm RMSE (points within 10 m, laboratory conditions)
Accuracy (Absolute, RMSE)3 cm horizontal and elevation, real time and post-processed (open sky, RTK)
Point-cloud Thickness≤ 1 cm post-processed
Repeatability2 cm
WeightAbout 1,200 g with battery and base
Dimensions148 × 100 × 313 mm
Cameras3 cameras — 2 fisheye (200° × 200°) + 1 forward (100° × 85°), 4000 × 3000 px, 1/2" CMOS, rolling shutter
Real-time Colourised Point CloudYes
Real-time DenoisingYes
Dynamic Object RemovalYes, in real time
RTK / GNSSBuilt-in module · RTK + PPK supported · BDS, GPS, GLONASS, Galileo, QZSS, SBAS
Storage512 GB eMMC · USB 3.1 Gen 2
BatteryClip-on 1,900 mAh pack · about 1.5 hours per pack · about 2 h full charge · under 20 W
Ingress / TemperatureIP54 · −20 °C to 50 °C
WirelessWi-Fi 802.11 a/b/g/n/ac · Bluetooth 5.0
Output FormatsPoint cloud .las / .rcp / .e57 / .ply / .ilas · imagery .jpg · mesh .osgb / .obj · 3DGS .lcc2 / .lcc / .ply · 3D Tiles / .usd
SoftwareLixelStudio + LCC (Lixel CyberColor)
AU PricingAUD $15,999 (Standard) / $16,999 (Scan More) inc GST
Global Launch6 May 2026
AvailabilityIn stock — ships from QLD

Specifications confirmed at XGRIDS global launch, 6 May 2026. AU pricing inc GST through AECT, the Official National Distributor.

FREQUENTLY ASKED

Lixel K2 FAQ

What is the XGRIDS Lixel K2?

The XGRIDS Lixel K2 is a lightweight handheld SLAM LiDAR scanner weighing about 1.2 kg with battery and base, with built-in RTK and three onboard cameras for real-time colourised point cloud capture. It outputs both engineering-grade LiDAR point clouds and 3D Gaussian Splatting (3DGS) models via the LCC platform. Global launch: 6 May 2026. AECT is the Official National Distributor in Australia.

How much does the XGRIDS K2 cost in Australia?

The XGRIDS Lixel K2 is priced at AUD $15,999 inc GST (Standard package) or AUD $16,999 inc GST (Scan More package, with extra battery for full-day capture) through AECT Solutions. Both packages include a LixelStudio licence, LCC platform access, onboarding, and a 12-month warranty. Rental is also available. The K1 is repositioned at AUD $14,999 inc GST as the entry tier.

How does the K2 compare to the Leica BLK2GO?

The K2 weighs about 1.2 kg with battery and base and the BLK2GO around 1 kg, but they differ on several key points. The K2 has built-in RTK; the BLK2GO does not (Leica's documented georeferencing path is control points or a paired GNSS smart antenna). The K2 captures real-time colourised point cloud; the BLK2GO does not. The K2 range is at least 40 m at 10% reflectivity (100 m maximum) versus around 25 m practical for the BLK2GO — though the BLK2GO measures faster at 420,000 points/sec against the K2's 200,000 points/sec. The K2 is AUD $15,999 inc GST; the BLK2GO has no published Australian price (C.R. Kennedy, the Australian Leica dealer, is quote-on-request), with international authorised-dealer pricing in the USD $37,500–$58,740 range. For outdoor, mixed-environment, or RTK-required workflows the K2 is the better starting point.

Does the XGRIDS K2 have built-in RTK?

Yes. The K2 has a built-in RTK module and supports both RTK and PPK GNSS modes. No external base station or tethered receiver is required — the K2 connects to a CORS network or local base, holds an RTK fixed solution, and outputs point clouds georeferenced to absolute coordinates at approximately 3 cm RMSE.

Can the K2 produce 3D Gaussian Splatting output?

Yes. The K2 produces 3DGS output via the LCC (Lixel CyberColor) platform. The same scan dataset can be processed into both an engineering-grade LiDAR point cloud (via LixelStudio) and a photoreal 3DGS model (via LCC). LCC2 data is 8–10% the size of standard open-source 3DGS and integrates with Unity, Unreal Engine, Revit, ArcGIS, and NVIDIA Omniverse.

When is the XGRIDS K2 available in Australia?

The K2 is available now. Global launch was 6 May 2026 and Australian general availability began 16 May 2026 — AECT Solutions stocks the K2 for both purchase and rental, shipped Australia-wide from Queensland.

Can I rent the XGRIDS K2 in Australia?

Yes. AECT offers K2 rental now with daily, weekly, and monthly rates (all inc GST). Every rental includes a LixelStudio licence and operator training. The monthly plan includes a rent-to-buy credit toward eventual purchase. Contact AECT for current rates.

Who is the Australian distributor for XGRIDS K2?

AECT Solutions is the official Australian National Distributor for XGRIDS LiDAR systems. Proudly Australian-owned and operated, Queensland-based, led by Jacob Lee, a certified ISO 9001, 14001 and 45001 Lead Auditor. All K2 sales, rentals, training, warranty, and onshore data processing in Australia run through AECT.

What is the difference between the XGRIDS K2 and K1?

The K2 is the engineering-grade tier: about 1.2 kg with built-in RTK for in-field georeferencing, 1 cm relative accuracy, three onboard cameras for real-time 360° colourisation, and dual output (engineering point cloud + 3DGS). The K1 is the entry tier — 200K pts/sec, 0.1–40 m range, no built-in RTK — ideal for GPS-denied indoor, underground and training use. Many teams run a K1 for interiors and a K2 as the site workhorse.

What software is included with the XGRIDS K2?

Every K2 purchased through AECT includes 3 × LixelStudio licences (permanent) for point-cloud processing plus an LCC Basic licence (single scene) for 3D Gaussian Splatting reconstruction — the same bundle as the K1 and L2 Pro. Upgraded LCC tiers for multi-scene publishing are available through AECT.

Does the K2 work indoors or without GPS?

Yes. The K2 uses multi-SLAM spatial perception, so it keeps tracking through GPS-denied environments — basements, stairwells, tunnels, plant rooms — and handles indoor-to-outdoor transitions without breaking the scan. The built-in RTK georeferences the outdoor portions; SLAM carries the indoor portions in the same dataset.

Where is XGRIDS K2 scan data processed? Is it kept in Australia?

All AECT capture and processing runs onshore in Queensland, Australia — full data sovereignty. Nothing needs to leave the country: LixelStudio and LCC processing run locally, and air-gapped delivery is available for government, defence and law-enforcement projects.

Does AECT provide K2 training and local support?

Yes. AECT provides Australian onboarding with every K2 (device setup, first-scan workflow, LixelStudio + LCC processing), local warranty handling as the national distributor, and hands-on training up to the multi-day 3DGS Masterclass — capture, process and publish on real sites with real equipment.

Order Your K2 — In Stock Now

In stock through AECT, the Official National Distributor — shipped Australia-wide from Queensland. Order now, or book a hands-on demo first.

Reserve Your K2 →Get a Quote