LIXEL L3 ROADSHOWAdelaide 19–20 Nov · Brisbane 20–21 Nov · Melbourne 23–27 Nov · Sydney 29 Nov – 4 DecBook a time in your city
Case study · Agriculture · Showcase
Plant detail, Lixel L3
Thin branches, captured in about two minutes
A Lixel L3 capture of a small potted tree, taken in about two minutes, as a photoreal 3DGS model and a LiDAR point cloud. The thin stems and branches hold together, which is the hard part of plant and canopy work.
- Captured with
- XGRIDS Lixel L3
- Capture
- About 2 minutes
- Subject
- A small potted tree, indoors
- Delivered
- A 3DGS model and a LiDAR point cloud
The challenge
Thin stems and branches are where most 3D capture breaks down: they blur, break up or disappear.
Plant research, nurseries and canopy work need that fine structure, not just the outline.
What was done
- CaptureCaptured the tree with a Lixel L3 in about two minutes.
- ProcessProcessed the capture into a photoreal 3DGS model and a LiDAR point cloud.
The result
- Thin branches stay continuous in both the 3DGS model and the point cloud.
- Measure on the point cloud, not on the 3DGS. Fine traits still need hand-measured ground truth.
- Outdoors, wind blurs moving leaves, and dense canopies hide inner branches, so plan still conditions and more than one pass.
End to end
What AECT ran on this job
The output
See the output
The tool
The Lixel L3 at work
General product footage, so you can see how the tool works. None of it is from this job.
Product footage: XGRIDS, not from this project.
Have a site like this?
Tell us what you need to capture and who needs to use it. We’ll show you the workflow on your own site.
Book a site demoRelated


