AI Scan-to-BIM — 1 Operator vs a 3-Person Crew
A single operator with a Lixel K1 and LCC for Revit delivered the same Scan-to-BIM output as a traditional 3-person survey crew — in a fraction of the time and cost.
Traditional Scan-to-BIM needs a multi-person survey crew, days on site, and manual modelling — expensive, slow, and hard to schedule.
Every re-measure means another site visit, and manual tracing of point clouds into BIM is the real bottleneck.
How We Delivered It
Single-operator capture
One person walked the space with a Lixel K1 handheld SLAM scanner — no tripod set-ups, no GPS needed.
One-click processing
LixelStudio produced a clean, registered point cloud straight from the walk-through.
AI Scan-to-BIM
LCC for Revit auto-generated BIM geometry from the scan — collapsing the manual-tracing bottleneck.
Delivery
A BIM-ready model handed off at a fraction of the time and cost of a 3-person crew.
See the Result
One operator matched the output of a 3-person survey crew.
1,000 m² captured in roughly 30 minutes of on-site time.
- →Registered point cloud (RCP / E57)
- →Revit BIM model
- →Floor plans
Have a project like this?
Tell us about your site, deliverables, and timeline — we'll show you what's possible.